What kind of batting should I use?
|April 16, 2001||in Ask the Experts|
Simple question, no? No! But Patricia and Donna have a lot of good advice to guide you in your selection.
What kind of batting should I use?
- A Quilter’s Review reader
Since we both do almost everything differently, which one of us do you want to ask? Just kidding! We’ll each give you our ideas and encourage you to find your favorite.
First, a surprise! We do agree on one thing: the batting should fit the project. We recommend using different battings for different projects. Carefully consider these factors when selecting your batting and you’ll be making wise batting choices:
- Use of quilt — wall quilt, bed quilt, child or baby quilt, garment?
- Laundering — will this quilt need to be laundered frequently ? Do you want the batting to shrink?
- Warm or Cool — for bed quilts, is this to be a winter or summer quilt?
- Appearance — do you want a thin or a puffy look?
- Appearance — do you want a fairly flat, low-sculptured look, or the “antique” look (which has puckering along the quilting lines)?
- Fiber content — natural (cotton, wool or silk) or synthetic (polyester) or a blend (cotton/poly)?
- Quilting – done by hand or machine or tied?
- Quilting Distance — refers to how far apart the “rows,” “meandering stitches,” or “channels” should be–close together (every inch or so) or farther apart (such as 4-6 inches)?
Check the batting labels for useful information. Make a sample “sandwich” of each batting you purchase — a piece of batting sandwiched between two pieces of muslin, all approximately 12″ x 12″. Use a permanent fabric marker to record the data about the batting: fiber content, recommended quilting distance, laundering, care instructions, etc.
Quilt some stitches and motifs on your sample sandwich to see how it needles. These little sandwiches are a gold mine of information!
In our travels, we’ve heard of batting parties where a group of quilters get together and make plans to buy small amounts of many different types of batting. Each person is responsible for purchasing one type of batting and preparing enough “sandwiches” to share with the others. This is a quick and easy way to learn a lot about many different battings.
Another thing we agree on: We both like to have lots of quilting in our projects. This means we select a batting that has low loft (height), since these are easier to needle, by hand or machine.
Patricia: I am a hand quilter who looks for a batting that is thin and easy to needle. I use 100% cotton fabrics and threads in my projects and would prefer to use a 100% cotton batt. I have not yet found the perfect batt for my quilts. In the meantime, I use a stable, thin polyester batt, such as Hobbs Thermore, because it does not beard.
Donna: I am a machine quilter and like a very stable batt that will not stretch or distort when it is in the machine. For wall quilts, I use a low-loft 100% cotton batt that has been needlepunched with a scrim (Warm and Natural), or an 80%/20% cotton/polyester batt that is fairly stable and has a little more loft than the 100% cotton batting (Hobbs Heirloom Premium Cotton).
I launder all my quilts, some several times a year. I do not want the cotton battings to shrink when laundered, so I pre-treat my batting in the following manner:
First, I cut the batting 3″ larger than the quilt top on all sides. I fill the washing machine with warm water and soak the batting at least 30 minutes. Then I move the washing machine dial by hand to the last “drain” part of the washing cycle and let the water drain out of the machine. After a minute or two it will start to spin. I let the batting spin no more than 10 seconds and then turn the dial to Off.
Next, the batting goes into the dryer on regular heat so it can be dried and pre-shrunk. It is then ready to be sandwiched.
When I need a polyester batt for projects, including garments, I, too, use Hobbs Thermore.
Read questions that Patricia Magaret and Donna Slusser answered
Meet Patricia Magaret and Donna Slusser
April 16, 2001
Kristin H. writes:
“I’ve fallen in love with wool batting for bed and lap quilts. It’s soft, pliable, wonderful to machine quilt, and it’s cozy!
“To pretreat, I steam with my iron. Don’t touch the iron to the batt, just hold it about one inch above and hit the Steam button. Hobbs is the only manufacturer I know of that makes this wonderful batt.
“I haven’t washed any of the quilts in which I’ve used
wool batting — I’d appreciate hearing of others’ experience.”
April 23, 2001
Janet E. writes:
“I also love to quilt using wool batting. It hand quilts like needling through butter!
“I also love to use Soft Touch by Fairfield. It is 100% cotton and quilts great. The only potential downside is that it only comes in crib and queen size.
“A lot of my wall hangings end up around 55″ to 60″
and it would be nice to be able to buy Soft Touch in king size. That way one batt would make two wall hangings.”
April 29, 2001
Anne T. writes:
“I too, love wool batting. It needles like butter and I like the loft it gives to the quilt.
“I just throw it in the dryer on a regular heat
setting and set the timer for about 10 minutes. This helps to get the creases out so it will lay flat.
“I love it and wouldn’t use anything else.”